--- Log opened Thu Sep 07 00:00:22 2017
00:07 #navit: <@KaZeR> hey pmckinley
00:16 #navit: < pmckinley> :-D Hey KaZeR
00:24 -!- pmckinley [~Peter_McK@88-110-200-212.dynamic.dsl.as9105.com] has left #navit []
03:45 -!- MHD_sam [c63a70ca@gateway/web/freenode/ip.198.58.112.202] has joined #navit
03:46 #navit: < MHD_sam> hello
03:48 #navit: < MHD_sam> if I connect GPS module To raspbery pi 3 via uart ( pin 8 and pin 10 ). can I send data from arduino to rasp via usb ?
03:48 #navit: < MHD_sam> without any blocking or any problem?
05:06 -!- xenos1984 [~xenos1984@2001:bb8:2002:200:6651:6ff:fe53:a120] has joined #navit
06:13 #navit: < MHD_sam> not response !!!
07:02 #navit: < jkoan> Hello MHD_sam
07:02 #navit: < MHD_sam> hello
07:03 #navit: < jkoan> Yes what you mentioned is possible without any problems
07:03 #navit: < MHD_sam> ok
07:03 #navit: < MHD_sam> other question
07:05 #navit: < MHD_sam> after connect gps module 6mv2 to rx and tx uart on raspberry. what is configuration for navit to connect directly with GPS module
07:06 #navit: < MHD_sam> my data com from /Dev/ttyAMA0
07:07 #navit: < jkoan> Also about the response time:we are sorry to respond late but we will respond on each request. But because we have not really much people to work on navit (and even no paid ones) it takes some time. Also all are in different time zones so it is hard to respond more fast. But we have the irclogs.navit.ie for everyone to read all the answers given even while you are offline
07:09 -!- MHD_sam_ [c63a70ca@gateway/web/freenode/ip.198.58.112.202] has joined #navit
07:09 #navit: < MHD_sam_> sorry jakon
07:09 #navit: < MHD_sam_> my connection disconnect
07:10 #navit: < MHD_sam_> last question in our session
07:10 -!- MHD_sam [c63a70ca@gateway/web/freenode/ip.198.58.112.202] has quit [Ping timeout: 260 seconds]
07:10 #navit: < jkoan> In the Navit.xml you can set the file and Baudrate to read from. Only search for "gps"
07:11 #navit: < MHD_sam_> what is configuration to connect navit with module
07:13 #navit: < MHD_sam_> ok
07:14 #navit: < jkoan> Wait I Moment, I will have a link for more informations
07:15 #navit: < jkoan> https://wiki.navit-project.org/index.php/Configuration what you are searching for is the vihicle configuration
07:34 -!- MHD_sam_ [c63a70ca@gateway/web/freenode/ip.198.58.112.202] has quit [Ping timeout: 260 seconds]
10:58 -!- ZeroOne [~ZeroOne@91.114.11.118] has joined #navit
11:26 -!- MHD-asm [c63a70ca@gateway/web/freenode/ip.198.58.112.202] has joined #navit
11:27 -!- ZeroOne [~ZeroOne@91.114.11.118] has quit [Read error: Connection reset by peer]
12:18 -!- MHD-asm [c63a70ca@gateway/web/freenode/ip.198.58.112.202] has quit [Ping timeout: 260 seconds]
13:52 -!- pmckinley [~peter@88-110-198-197.dynamic.dsl.as9105.com] has joined #navit
13:53 -!- xenos1984 [~xenos1984@2001:bb8:2002:200:6651:6ff:fe53:a120] has quit [Quit: Leaving.]
14:18 -!- pmckinley [~peter@88-110-198-197.dynamic.dsl.as9105.com] has left #navit []
14:27 -!- xenos1984 [~xenos1984@22-164-191-90.dyn.estpak.ee] has joined #navit
15:42 -!- MHD-acm [616b8108@gateway/web/freenode/ip.97.107.129.8] has joined #navit
15:42 #navit: < MHD-acm> hello all
15:42 #navit: < MHD-acm> I have many proplem
15:45 #navit: < MHD-acm> I download file.bin and rename it with the name in folder maps . but no thing show . this file for syria country
15:50 -!- MHD-asm [616b8108@gateway/web/freenode/ip.97.107.129.8] has joined #navit
15:50 -!- MHD-acm [616b8108@gateway/web/freenode/ip.97.107.129.8] has quit [Ping timeout: 260 seconds]
15:52 -!- MHD_asm [2d38584f@gateway/web/freenode/ip.45.56.88.79] has joined #navit
15:52 #navit: < MHD_asm> I have message in terminal extenstion rander missing on display
15:54 -!- MHD-asm [616b8108@gateway/web/freenode/ip.97.107.129.8] has quit [Ping timeout: 260 seconds]
15:56 #navit: < MHD_asm> the second problem
15:57 #navit: < MHD_asm> I recived gps data from ttyAMA0 only via minicom
15:58 #navit: < MHD_asm> but when I try recive by cgps -s no any data and time out message
15:59 -!- MHD-asm [2d38584f@gateway/web/freenode/ip.45.56.88.79] has joined #navit
16:00 #navit: < MHD-asm> when I try execute cat /dev/ttyAMA0
16:00 #navit: < MHD-asm> I recive correct data
16:02 -!- MHD_asm [2d38584f@gateway/web/freenode/ip.45.56.88.79] has quit [Ping timeout: 260 seconds]
16:07 -!- MHD-asm [2d38584f@gateway/web/freenode/ip.45.56.88.79] has quit [Ping timeout: 260 seconds]
16:45 -!- noradtux [~noradtux@port-21473.pppoe.wtnet.de] has quit [Ping timeout: 240 seconds]
16:46 -!- noradtux [~noradtux@port-56364.pppoe.wtnet.de] has joined #navit
16:57 #navit: <@KaZeR> hey there
17:13 -!- MHD_asm [059bb7f9@gateway/web/freenode/ip.5.155.183.249] has joined #navit
17:16 #navit: <@KaZeR> hey MHD_asm
17:20 #navit: <@KaZeR> MHD_asm: i saw your questions. For the map, maybe you don't see the content of the map because your position is not centered in Syria currently (the default position when there's no gps signal is in Germany)
17:20 #navit: <@KaZeR> if you go in the main menu, settings, maps, do you see your map listed?
17:23 #navit: < MHD_asm> i see bin file with green check
17:24 #navit: < MHD_asm> and route with green check
17:24 #navit: < MHD_asm> Route Graph  with x
17:24 #navit: < MHD_asm> navigation with x
17:24 #navit: < MHD_asm> tracking with x
17:25 #navit: < ilovekiruna> Hi KaZeR, hi MHD_asm
17:26 #navit: < MHD_asm> when I clicked on them convert to green check
17:26 #navit: < MHD_asm> hi
17:27 #navit: < MHD_asm> but no thing show when I go back to map
17:29 #navit: < MHD_asm> I connect gps to raspberry direct via uart
17:29 #navit: < MHD_asm> I can see data with command cat /dev/ttyACM0
17:30 #navit: < MHD_asm> or via minicom
17:30 #navit: < MHD_asm> but I can not see any thig with gpsd
17:31 #navit: < MHD_asm> I get message timeot
17:33 #navit: < MHD_asm> untill when I change sourse in navit.xml to
17:34 #navit: < MHD_asm> sourse="file:/dev/ttyAMA0" baudrate="9600"
17:40 #navit: <@KaZeR> MHD_asm: what you describe really looks like navit still thinks that you are in germany
17:41 #navit: < ilovekiruna> KaZeR: Out of curiousity, why was Germany selected?
17:41 #navit: <@KaZeR> hi ilovekiruna :)
17:41 #navit: <@KaZeR> ilovekiruna: the default position is centered around cp15's home town. cp15 is the project founder and wrote a huge part of navit
17:42 #navit: < ilovekiruna> I c,  nice to honor him in this way
17:42 #navit: < ilovekiruna> is that in Munich area?
17:46 #navit: <@KaZeR> yes exactly
17:48 -!- jandegr [5742bc38@gateway/web/freenode/ip.87.66.188.56] has joined #navit
17:51 #navit: < MHD_asm> I will tru it
17:51 #navit: < MHD_asm> try it
17:51 #navit: < MHD_asm> but I need solve to gps module
17:53 #navit: <@KaZeR> so what's the issue with your gps module?
17:54 #navit: < jandegr> hi kazer
17:57 #navit: <@KaZeR> hey jandegr !
18:00 #navit: <@KaZeR> what's up jandegr ? long time no chat :)
18:00 #navit: < MHD_asm> I rcive data correctly with command cat /dev/ttyAMA0
18:00 #navit: < jandegr> just a quick look around to see if I missed smth :)
18:01 #navit: < MHD_asm> or via minicom
18:01 #navit: < MHD_asm> but I can recive this data with gpsd or navit
18:02 #navit: < MHD_asm> but I can not recive this data with gpsd or navit
18:03 #navit: < MHD_asm> I try change  default position is centered but no thing show
18:03 #navit: <@KaZeR> jandegr: of notable impact is the switch to circleci v2. Allows us to build CI workflows and use any docker image for the builds, instead of being limited to ubuntu 12.04 or ubuntu 14.04
18:04 #navit: <@KaZeR> MHD_asm: let's try via gpsd first. Stop the gpsd service, and run gpsd -N -d9 /dev/ttyAMA0
18:04 #navit: <@KaZeR> then in another terminal, "gpspipe -r"
18:12 #navit: < MHD_asm> I get message : could not connect to gpsd localhost:2947
18:13 #navit: < MHD_asm> can not connect to host/port
18:16 #navit: < MHD_asm> I try another
18:16 #navit: < MHD_asm> I get message
18:17 #navit: < MHD_asm> class: devices []
18:17 #navit: < MHD_asm> raw=0
18:17 #navit: < MHD_asm> nemea=true
18:18 #navit: < MHD_asm> but no benfit data
18:21 -!- pini [~pini@bou-fi.pustule.org] has joined #navit
18:21 -!- pini [~pini@bou-fi.pustule.org] has quit [Client Quit]
18:22 #navit: <@KaZeR> "could not connect to gpsd localhost:2947" means that gpsd is not running
18:22 -!- pini [~pini@bou-fi.pustule.org] has joined #navit
18:22 #navit: <@KaZeR> let me double check the command i gave you
18:23 #navit: <@KaZeR> sorry, -D not -d. So gpsd -N -D9 /dev/ttyAMA0
18:23 -!- jandegr [5742bc38@gateway/web/freenode/ip.87.66.188.56] has quit [Quit: Page closed]
18:37 #navit: < MHD_asm> yes I retry
18:37 #navit: < MHD_asm> I have message
18:38 #navit: < MHD_asm> device activision field
18:39 #navit: < MHD_asm> device activision field /dev/ttyAMA0
18:46 #navit: < MHD_asm> Kazer I changed  default position is centered in navit.xml but no thing show. are there any file can I chaged yet ?
18:53 #navit: <@KaZeR> do you have a center.txt file in the folder where you run navit?
18:53 #navit: <@KaZeR> this is how navit remembers your last position
18:53 #navit: <@KaZeR> it should be in the folder where you last started navit, or it could be in ~/.navit/
18:54 #navit: <@KaZeR> can you share gpsd's full output? please use something like http://www.pastebin.com for that
19:09 -!- pini [~pini@bou-fi.pustule.org] has quit [Ping timeout: 248 seconds]
19:40 -!- MHD_asm [059bb7f9@gateway/web/freenode/ip.5.155.183.249] has quit [Ping timeout: 260 seconds]
19:47 #navit: < ilovekiruna> KaZeR: could u update your ebuild on the bug-tracker?
19:47 #navit: < ilovekiruna> or should I do it?
20:48 -!- pmckinley [~Peter_McK@88-110-194-183.dynamic.dsl.as9105.com] has joined #navit
20:49 #navit: < pmckinley> greetings earthlings
20:49 #navit: < pmckinley> :-D
20:49 #navit: < pmckinley> take me to your leader
20:49 #navit: < pmckinley> :P
20:49 #navit: < pmckinley> hey KaZeR
20:53 #navit: < ilovekiruna> pmckinley: which leader? economic? political? relgious? spiritual?
20:53 #navit: < pmckinley> software
20:53 #navit: < pmckinley> :-D
21:06 -!- pmckinley [~Peter_McK@88-110-194-183.dynamic.dsl.as9105.com] has quit [Read error: Connection reset by peer]
21:15 -!- pmckinley [~Peter_McK@88-110-194-183.dynamic.dsl.as9105.com] has joined #navit
21:29 -!- pmckinley [~Peter_McK@88-110-194-183.dynamic.dsl.as9105.com] has quit [Ping timeout: 248 seconds]
22:23 #navit: <@KaZeR> ilovekiruna: you're welcome to do it if you feel so inclined. We could also create a project under the navit-gps git repo if it's more convenient. Maybe it could eventually become the source of truth
22:43 -!- xenos1984 [~xenos1984@22-164-191-90.dyn.estpak.ee] has quit [Quit: Leaving.]
22:50 -!- pmckinley [~Peter_McK@88-110-194-183.dynamic.dsl.as9105.com] has joined #navit
22:51 #navit: < pmckinley> hey KaZeR
22:51 #navit: < pmckinley> hey ilovekiruna
22:51 #navit: < pmckinley> :)
22:52 #navit: < ilovekiruna> Kazer: because I think the bgo-overlay just uses the ebuilds from Gentoo bugzilla
22:53 #navit: < ilovekiruna> hi pmckinley :)
22:53 #navit: < ilovekiruna> the other overlay, is a real repository, so I can make a fork and provide a pull-request
22:53 #navit: < ilovekiruna> but ofc an official overlay is also a nice idea
23:12 #navit: < pmckinley> Hi KaZeR I'm still getting the same delayed announcement on speedwarner I mentioned a while back
23:12 #navit: < pmckinley> 5s in Lubuntu, 10s in Windows
23:13 #navit: < pmckinley> I think you repicated the problem and acknowledged it was a regression
23:13 #navit: < pmckinley> the version from the Ubuntu repositories doesn't have this problem
23:18 #navit: < pmckinley> replicated
23:30 -!- Horwitz [~mich1@p200300800E7B4300022268FFFE64E7C4.dip0.t-ipconnect.de] has quit [Ping timeout: 252 seconds]
23:43 -!- Horwitz [~mich1@p200300800E111401022268FFFE64E7C4.dip0.t-ipconnect.de] has joined #navit
23:43 -!- mode/#navit [+o Horwitz] by ChanServ
--- Log closed Fri Sep 08 00:00:24 2017